Here you can see how to setup Microsoft Windows 2008 R2 failover cluster in VMware Workstation.This article contains step by step method on Microsoft windows 2008 R2 failover cluster with freenas iscsi disks in VMware workstation just on your computer. if you search on internet about setting up Windows 2008 R2 cluster in any desktop virtualization software, you can’t find it in one place.
Installation and setup procedure for MS windows 2003 cluster and earlier versions are available on internet, but not Windows 2008 or R2 failover cluster. Everybody including me stuck in one place while setting up Windows 2008 or R2 cluster in Virtualization environment, which is Cluster disk validation. This is the main issue on MS windows 2008 R2 cluster in VMware workstation or Sun virtual box desktop virtualization software.
Windows 2008 and R2 failover clusters require SCSI-3 persistent reservation target disks as their cluster disks. Now question is how to setup SCSI-3 persistent reservation cluster disks in VMware workstation? I already wrote an article on setting up SCSI-3 persistent reservation cluster iSCSI disksin VMware workstation using FreeNAS. Before continue reading this post, please read my previous article and create cluster disks in your VMware workstation according to cluster need.
Let’s start the installation and setup of Windows 2008 or R2 Failover cluster in desktop virtualization software VMware workstation.
Required Software
a) VMware workstation
b) Windows 2008 or R2 Operating System
c) FreeNAS
Prerequisites setup
a) Installation of Windows 2008 or R2 Operating System in VMware Workstation ( Three Windows 2008 R2 Server virtual machines required. One as domain controller and other twos as cluster nodes)
b) Setup domain on one server and join other two servers with domain. Use domain administrator login for servers. ( in this example, domain name is sysprobs.net and cluster server names are vm-clus1 and vm-clus2)
c) Install failover cluster feature in two windows 2008 or R2 servers you are going to setup failover cluster in VMware workstation.
d) Install second network card in both cluster servers. Give two separate IP addresses, so both servers can communicate through this network also. This network will be used as ‘heart beat’ network for both servers. Make sure, this network name is identical in both servers. (in this example, heart beat network named as ‘ internal’ on both servers)
e) Create cluster disks in your FreeNAS virtual machine. Read my previous post on creating SCSI-3 persistent reservation target iSCSI disks in FreeNAS.
( in this example,
Qurom disk – 512MB,
Storage disk1- 2GB,
Storage disk 2- 2GB,
Storage disk 3 – 2GB,
and Backup disk 4GB)
( in this example,
Qurom disk – 512MB,
Storage disk1- 2GB,
Storage disk 2- 2GB,
Storage disk 3 – 2GB,
and Backup disk 4GB)
No comments:
Post a Comment